VICTRON ENERGY – Phoenix 48/800 VE.Direct NEMA GFCI (UL 458)


Phoenix 48/800 VE.Direct NEMA GFCI (UL 458)


Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V, or 48V DC.

Models: 250VA, 375VA, 500VA, 800VA, 1200VA


  • Brand: Victron Energy
  • Manufacturer Part Number: PIN481800510
  • Cont. power at 25°C: 800VA
  • Cont. power at 25°C / 40°C: 650 / 560W
  • Peak power: 1500W
  • Output AC voltage: 120VAC
  • Input voltage range: 36.8 – 62V
  • DC low shut down (adjustable): 37.2V
  • DC low restart and alarm (adjustable): 43.6V
  • Battery charged detect (adjustable): 56V
  • Max. efficiency: 91%
  • Zero-load power: 9.5W
  • Output Socket: NEMA GFCI (UL 458)
  • Dimensions: H105 x W216 x D305mm
  • Weight: 5.5Kg
  • Warranty: 5 Years

VE.Direct communication port

The VE.Direct port can be connected to:
-A computer (VE.Direct to USB interface cable needed)
-Apple and Android smartphones, tablets, MacBook, and other devices (VE.Direct Bluetooth Smart dongle needed)
Fully configurable:
-Low battery voltage alarm trip and reset levels
-Low battery voltage cut-off and restart levels
-Dynamic cut-off: load-dependent cut-off level
-Output voltage 210 – 245V
-Frequency 50 Hz or 60 Hz
-ECO mode on/off and ECO mode sense level
-In- and output voltage, % load, and alarms

Proven reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short-circuited proof and protected against overheating, whether due to overload or high ambient temperature.

High start-up power

Needed to start loads such as power converters for LED lamps, halogen lamps, or electric tools.

ECO mode

When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once on standby, the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote on/off

A remote on/off switch can be connected to a two-pole connector, or between battery plus and the left-hand contact of the two-pole connector.

LED diagnosis

Please see the manual for a description.

To transfer the load to another AC source: the automatic transfer switch

For our low-power inverters, we recommend our Filax Automatic Transfer Switch. The Filax features a concise switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.

Available with different output sockets

Schuko, UK, AU/NZ, IEC-320 (male plug included), Nema 5-15R, GFCI

DC connection with screw terminals

No special tools are needed for installation.

Weight 5,5 kg