Sale!

VICTRON ENERGY – Cyrix-Li-Charge 12/24V-120A

R1221,00

Cyrix-Li-Charge 12/24V-120A

Whenever battery voltage is less than 13,5V (resp. 27V or 54V), the Cyrix will disengage with a delay of 1 hour. Note 1: In case of zero discharge current, or a small discharge current, the Cyrix will not disengage shortly after the charger has been switched off and/or disconnected, because battery voltage will remain higher than 13,5V. Note 2: If, after the Cyrix has disengaged, the output of the battery charger immediately increases to 13,7V or more, the Cyrix will re-engage, with 3 seconds delay

Specifications:

  • Brand: Victron Energy
  • Manufacturer Part Number: CYR010120430
  • Dimensions: H46 x W46 x D80mm
  • Weight: 0.1Kg
  • Warranty: 5 Years

The Cyrix-Li-Charge will connect a battery charger with 3 seconds delay:

– if the Charge Disconnect output of the VE.Bus BMS is high, and – if it senses 13,7V (resp. 27,4V or 54,8V) or more on its battery charger connection terminal, and – if it senses 2V or more on its battery terminal (the Cyrix will remain open, if not connect to the battery).

The Cyrix-Li-Charge will disengage immediately whenever its control input becomes free floating, signalling cell over voltage or cell over temperature.

In general a cell over voltage alarm will reset shortly after charging has been stopped. The Cyrix will then reconnect the charger after a delay of 3 seconds. After two attempts to reengage with 3 seconds delay, the delay increases to 10 minutes.

Weight 0,1 kg